Difference between revisions of "Workspace/shoplog"
(→Month) |
(→Month) |
||
| Line 3: | Line 3: | ||
==Month== | ==Month== | ||
| + | ===September=== | ||
| + | *Power run for vanity lights and Mechanisms project board | ||
| + | *Troubleshooting air leaks in Woodshop | ||
| + | **Swapping ceiling spool to a short air whip instead of 2 elbows | ||
| + | *Sawstop brake tripped due to metal on a jig. Replacement blade/brake was installed | ||
| + | |||
| + | ===August 2023=== | ||
| + | *Power run to Mechanism's Pit | ||
| + | *Ceiling air spool added to woodshop | ||
| + | *Dust cyclone and chip separator acquired. Will be installed late Sept/early Oct | ||
| + | |||
===July 2023=== | ===July 2023=== | ||
*Dust collection additions | *Dust collection additions | ||
Latest revision as of 04:58, 20 September 2023
Contents
Shops Log
Log of shop projects and general changes within the Wood and Metal shops.
Month
September
- Power run for vanity lights and Mechanisms project board
- Troubleshooting air leaks in Woodshop
- Swapping ceiling spool to a short air whip instead of 2 elbows
- Sawstop brake tripped due to metal on a jig. Replacement blade/brake was installed
August 2023
- Power run to Mechanism's Pit
- Ceiling air spool added to woodshop
- Dust cyclone and chip separator acquired. Will be installed late Sept/early Oct
July 2023
- Dust collection additions
- Delta Jointer and Woodmaster Planer
- Sanding Bench
- Drum Sander
- Rigid Table Saw power cord added
- Air compressor
- Compressor plumbed in
- Soft line run to spool near SawStop
- Soft line run to wall near power panel
- Soft line run to Mechanisms' pit
- Electrical run to Mechanisms' pit
- Modified central worktable to store donated aluminum.
June 2023
- Additional lighting in wood shop
- 4x 4' LED fixtures over CNC/lathe area and Tool Island/sanders
- 4' LED fixture near back door
- extension cord reel added to back of shop
- Sawstop blade elevation gear replaced
- Switch added for overhead 24" fan
- Compressor wiring added in
- Partial air system in progress
- Safety station upgraded to have PPE storage
- Sandblaster assembled by Ryan C
- CCTV Replacement finished
- "Bret Bench" extended to wrap around towards the large toolbox
- Peg board added above large toolbox
- Grinder area cleaned out and reorganized
- Central dust collection set back up*
May 2023
- Upgraded 2 strands of lights in the wood shop to LED
- CCTV Replacement started
April 2023
- Dust Collection Pipe run
- 6" Main trunk with 4" connections down to tools
- 3HP Dust Collector connected with temporary wiring
- Started reverse engineering control box
March 2023
- Large trash can donated by Chris N and set in wood shop.
- Damaged motor cord on planer. Found and fixed by Shane G, Chris K, Bret L.
February 2023
January 2023
- Consolidation panic
- Tools shifted from Unit 2 over
- New Metal shop electrical mostly stubbed out
- Subpanel split off for metal shop
