Workspace/shoplog

Shops Log

Log of shop projects and general changes within the Wood and Metal shops.

Month

July 2023

• Dust collection additions
  • Delta Jointer and Woodmaster Planer
  • Sanding Bench
  • Drum Sander
• Rigid Table Saw power cord added
• Air compressor
  • Compressor plumbed in
  • Soft line run to spool near SawStop
  • Soft line run to wall near power panel
  • Soft line run to Mechanisms' pit
• Electrical run to Mechanisms' pit
• Modified central worktable to store donated aluminum.

June 2023

• Additional lighting in wood shop
  • 4x 4' LED fixtures over CNC/lathe area and Tool Island/sanders
  • 4' LED fixture near back door
• extension cord reel added to back of shop
• Sawstop blade elevation gear replaced
• Switch added for overhead 24" fan
• Compressor wiring added in
  • Partial air system in progress
• Safety station upgraded to have PPE storage
• Sandblaster assembled by Ryan C
• CCTV Replacement finished
• "Bret Bench" extended to wrap around towards the large toolbox
• Peg board added above large toolbox
• Grinder area cleaned out and reorganized
• Central dust collection set back up*

May 2023

• Upgraded 2 strands of lights in the wood shop to LED
• CCTV Replacement started

April 2023

• Dust Collection Pipe run
  • 6" Main trunk with 4" connections down to tools
• 3HP Dust Collector connected with temporary wiring
  • Started reverse engineering control box

March 2023

• Large trash can donated by Chris N and set in wood shop.
• Damaged motor cord on planer. Found and fixed by Shane G, Chris K, Bret L.

January 2023

• Consolidation panic
• Tools shifted from Unit 2 over
• New Metal shop electrical mostly stubbed out
  • Subpanel split off for metal shop