Difference between revisions of "Workspace/shoplog"

From The Maker Station Wiki!
Jump to: navigation, search
(Month)
 
(9 intermediate revisions by the same user not shown)
Line 3: Line 3:
  
 
==Month==
 
==Month==
 +
===September===
 +
*Power run for vanity lights and Mechanisms project board
 +
*Troubleshooting air leaks in Woodshop
 +
**Swapping ceiling spool to a short air whip instead of 2 elbows
 +
*Sawstop brake tripped due to metal on a jig. Replacement blade/brake was installed
 +
 +
===August 2023===
 +
*Power run to Mechanism's Pit
 +
*Ceiling air spool added to woodshop
 +
*Dust cyclone and chip separator acquired. Will be installed late Sept/early Oct
 +
 +
===July 2023===
 +
*Dust collection additions
 +
**Delta Jointer and Woodmaster Planer
 +
**Sanding Bench
 +
**Drum Sander
 +
*Rigid Table Saw power cord added
 +
*Air compressor
 +
**Compressor plumbed in
 +
**Soft line run to spool near SawStop
 +
**Soft line run to wall near power panel
 +
**Soft line run to Mechanisms' pit
 +
*Electrical run to Mechanisms' pit
 +
*Modified central worktable to store donated aluminum.
 +
 
===June 2023===
 
===June 2023===
 
*Additional lighting in wood shop
 
*Additional lighting in wood shop
 
**4x 4' LED fixtures over CNC/lathe area and Tool Island/sanders
 
**4x 4' LED fixtures over CNC/lathe area and Tool Island/sanders
 +
**4' LED fixture near back door
 +
*extension cord reel added to back of shop
 +
*Sawstop blade elevation gear replaced
 
*Switch added for overhead 24" fan
 
*Switch added for overhead 24" fan
 
*Compressor wiring added in
 
*Compressor wiring added in
Line 12: Line 40:
 
*Sandblaster assembled by Ryan C
 
*Sandblaster assembled by Ryan C
 
*CCTV Replacement finished
 
*CCTV Replacement finished
 +
*"Bret Bench" extended to wrap around towards the large toolbox
 +
*Peg board added above large toolbox
 +
*Grinder area cleaned out and reorganized
 +
*Central dust collection set back up*
 +
 
===May 2023===
 
===May 2023===
 
*Upgraded 2 strands of lights in the wood shop to LED
 
*Upgraded 2 strands of lights in the wood shop to LED
Line 18: Line 51:
 
*Dust Collection Pipe run
 
*Dust Collection Pipe run
 
**6" Main trunk with 4" connections down to tools
 
**6" Main trunk with 4" connections down to tools
 +
*3HP Dust Collector connected with temporary wiring
 +
**Started reverse engineering control box
 +
 
===March 2023===
 
===March 2023===
 
*Large trash can donated by Chris N and set in wood shop.
 
*Large trash can donated by Chris N and set in wood shop.
Line 23: Line 59:
 
===February 2023===
 
===February 2023===
 
===January 2023===
 
===January 2023===
 +
*Consolidation panic
 +
*Tools shifted from Unit 2 over
 +
*New Metal shop electrical mostly stubbed out
 +
**Subpanel split off for metal shop

Latest revision as of 04:58, 20 September 2023

Shops Log

Log of shop projects and general changes within the Wood and Metal shops.

Month

September

  • Power run for vanity lights and Mechanisms project board
  • Troubleshooting air leaks in Woodshop
    • Swapping ceiling spool to a short air whip instead of 2 elbows
  • Sawstop brake tripped due to metal on a jig. Replacement blade/brake was installed

August 2023

  • Power run to Mechanism's Pit
  • Ceiling air spool added to woodshop
  • Dust cyclone and chip separator acquired. Will be installed late Sept/early Oct

July 2023

  • Dust collection additions
    • Delta Jointer and Woodmaster Planer
    • Sanding Bench
    • Drum Sander
  • Rigid Table Saw power cord added
  • Air compressor
    • Compressor plumbed in
    • Soft line run to spool near SawStop
    • Soft line run to wall near power panel
    • Soft line run to Mechanisms' pit
  • Electrical run to Mechanisms' pit
  • Modified central worktable to store donated aluminum.

June 2023

  • Additional lighting in wood shop
    • 4x 4' LED fixtures over CNC/lathe area and Tool Island/sanders
    • 4' LED fixture near back door
  • extension cord reel added to back of shop
  • Sawstop blade elevation gear replaced
  • Switch added for overhead 24" fan
  • Compressor wiring added in
    • Partial air system in progress
  • Safety station upgraded to have PPE storage
  • Sandblaster assembled by Ryan C
  • CCTV Replacement finished
  • "Bret Bench" extended to wrap around towards the large toolbox
  • Peg board added above large toolbox
  • Grinder area cleaned out and reorganized
  • Central dust collection set back up*

May 2023

  • Upgraded 2 strands of lights in the wood shop to LED
  • CCTV Replacement started

April 2023

  • Dust Collection Pipe run
    • 6" Main trunk with 4" connections down to tools
  • 3HP Dust Collector connected with temporary wiring
    • Started reverse engineering control box

March 2023

  • Large trash can donated by Chris N and set in wood shop.
  • Damaged motor cord on planer. Found and fixed by Shane G, Chris K, Bret L.

February 2023

January 2023

  • Consolidation panic
  • Tools shifted from Unit 2 over
  • New Metal shop electrical mostly stubbed out
    • Subpanel split off for metal shop