Drill Press

From The Maker Station Wiki!
Revision as of 17:59, 30 July 2016 by Tanju (talk | contribs)
Jump to: navigation, search

Back to list of Equipment


  • Owner/Loaner: Randy Keeling
  • Serial Number: Serial Number?
  • Make/Model: Make/Model of equipment?
  • Arrival Date: Aug 1, 2014
  • Usability: {{{usagerestrictions}}}
  • Contact: Randy Keeling
  • Where: Back wall near roll up door


Info

Entanglement hazard.jpg

Make sure that the drill is set for the right speed for the cutting application: wood vs steel vs brass, etc.

If you have never adjusted the speed before, ask a knowledgeable member for help.


SAFETY

  • Entanglement HAZARD
  • No one wears ties in the shop anymore, but long hair, sleeves, and headphones are all still at risk
  • Make sure that long hair is tied back
  • No long sleeves
  • No headphones, earbuds, or loose wires
  • Make sure work piece is secured or clamped down

Depth Setting

You can adjust the depth of the drill by adjusting the stop.

If the ring collar is broken or missing, you can print a new one using this file that can be downloaded from our GitHub repo, click here.

If you break the collar and are unable to print a replacement, please notify the Board of Directors

Replacement ring drill press.JPG

Vise