Difference between revisions of "Drill Press"

Owner/Loaner: Randy Keeling
Serial Number: Serial Number?
Make/Model: Make/Model of equipment?
Arrival Date: Aug 1, 2014
Usability: {{{usagerestrictions}}}
Contact: Randy Keeling
Where: Back wall near roll up door

Revision as of 11:33, 26 March 2016

Make sure that the drill is set for the right speed for the cutting application: wood vs steel vs brass, etc.

If you have never adjusted the speed before, ask a knowledgeable member for help.

You can adjust the depth of the drill by adjusting the stop.

If the ring collar is broken or missing, you can print a new one using this file that can be downloaded here.

If you break the collar and are unable to print a replacement, please notify the Board of Directors

@@ Line 13: / Line 13: @@
 If you have never adjusted the speed before, ask a knowledgeable member for help.
+=== SAFETY ===
+*Entanglement HAZARD*
+* Make sure that long hair is tied back
+* No long sleeves
+* No headphones, earbuds, or loose wires
+* Make sure work piece is secured or clamped down
+===Depth Setting===
+You can adjust the depth of the drill by adjusting the stop.
+If the ring collar is broken or missing, you can print a new one using this file that can be downloaded here.
+If you break the collar and are unable to print a replacement, please notify the Board of Directors
+=== Vise ===