Belt Sander Sanding Station
- Owner/Loaner: Randy Keeling
- Serial Number: Serial Number
- Make/Model: Make/Model of equipment
- Arrival Date: Sept 2014
- Usability: {{{usagerestrictions}}}
- Contact: info@themakerstation.com
- Where: Back wall near roll up door
Contents
Info
4" x 6" Combination sander with adjustable belt sands inside and outside curves.
General Specs
- 6 in. disc 1819 rpm
- 4 x 36 in. belt 1185 fpm
- Cast aluminum table tilts to 60° for use with belt or disc
- 3/4 HP motor
- Miter gauge for beveling
Permissions
- For general use by members.
- Treat equipment as if it were your own and put away as or better than you found it.
Restrictions
- Safety glasses required
- Closed toed shoes required
- No long sleeves or loose clothing
- Long hair must be tied back
Basic Instructions
Add instuctions, lists, links, videos as needed here Manual - OEM Instruction Manual: http://manuals.harborfreight.com/manuals/97000-97999/97181.pdf
Advanced Operational Knowledge
There are some more advanced tasks that not everyone needs to know to do XXXXX, but needs to know to troubleshoot:
- x
- y
Warnings
- Keep loose hair and sleeves away from all moving parts
- Beware parts may become hot after use
- Beware of dust, fumes, choking hazards
Safety
FILL THIS OUT THOROUGHLY
- x
- y.
References
- links as needed
