Dremel Micro 8050
- Owner/Loaner: Jay Dellinger
- Serial Number: Serial Number
- Make/Model: Dremel Micro 8050
- Arrival Date: 12/31/2014
- Usability: {{{usagerestrictions}}}
- Contact: Jay Dellinger
- Where: Workstation #3
Info
This is a brand new Dremel Micro 8050. There is a small box of bits for it next to the charging base. The tool should be stored on the charging base when not in use.
Permissions
- For general use by members.
- Treat equipment as if it were your own and put away as or better than you found it.
Basic Instructions
- Use the included collet wrench to tighten/loosen collet for changing bits.
- Make sure bits are secure before using.
- Consult the instruction manual below for recommended speeds for different materials.
Safety
- Keep loose hair and sleeves away from all moving parts.
- Bits and workpieces will be hot from friction after using
- Wear safety glasses when using this tool
