Workspace

From The Maker Station Wiki!
Revision as of 20:06, 16 August 2022 by Yido (talk | contribs) (Added Electronics Room section)
Jump to: navigation, search

This is meant to be a collection of information about the features, operation, and maintenance of our workspace.

Location

The Maker Station is located in the Pickens Industrial Business Park off of Allgood Road in Marietta, a few minutes away from the Allgood Rd and Cobb Pkwy intersection.
Address: 869 Pickens Industrial Drive North East, Suite# 1, Marietta, GA

Equipment

Equipment at the space is constantly changing due to generous donations and the needs of the members. An attempt to catalog them can be found on t the Equipment page.

Access to the Space

If you would like to visit the space, the best way is to attend an open house or other event as published on our Meetup page. This is the best way to find which events are scheduled in the space. You may find members there at other hours, but since you never can tell, your best bet is to check the calendar. Once you join and become a member of the space, you will be given a lockbox code to allow you to access a key to the facility. You can use this to come and go as needed to work on your own projects and make use of the space. You will need to adhere to the guidelines around ingress/egress to ensure a safe and enjoyable working environment.

Entry/Exit

During open house or scheduled events, guests can enter/exit as they wish. Members accessing the space at other times, should log your entry and exit time on the sign-in sheet. The sign-in sheet is on a clipboard hanging on the wall behind the main door from the street. Please make sure you sign in and out so we have a log of activity and traffic in the space. Future projects may augment/replace this procedure, but for now, this is how we will access the space. When leaving, if you are the last one out, make sure the lights are off, and that all doors are locked.

Rollup Door

There is a rollup door in back to provide access for larger equipment and supplies. It can be accessed by driving around the building. Watch out for large trucks and loading dock traffic. Do not park/leave your vehicle unattended at the loading dock area. Make sure the rollup door is secured and the rear personnel door is locked when not in use.

SAFETY WARNING DO NOT WORK DIRECTLY UNDERNEATH THE ROLL UP DOOR

Lights

To conserve power usage for the space, please turn off unnecessary lights in the space. Please use lights as needed for safety and project work, but turn them off when finished. When leaving make sure all lights are out.

Bathroom

Bathroom on the far right in the central back room.

Please help take care of this facility and report any maintenance issues immediately. We are all responsible for keeping this area clean and sanitary. There is no cleaning service.

The Train

  • sigh* --- do you miss it already? Our original makerspace was located on 52 Powder Springs St in Marietta right next to the train tracks. Some of the older members may be nostalgic for the train.

The Plane

Our second makerspace was located on 1700 Cumberland Point Dr in Marietta across the street from Dobbins Air force base. When a large plane was landing, it always seemed like the wheels would touch our roof as it roared by!

The Electronics Room

The Electronics Room is between the Board Room and the Members' Storage Room. It contains lots of electronics tools and supplies, including soldering irons, solder, wires, multimeters, fuses, LEDs, and more. Check out a partial list of equipment here.

Usage and Maintenance

We are all part of this community and as we use the space, things will get messy. Please take time to put your projects away as best you can and clean up any messes or safety hazards (even if they are not your own) so that we can keep this an enjoyable place for everyone. Members will have storage bins for their use. Guests should take any of their project materials with them when they leave. The space is there to be used by the members. We do not need committee to decide to move a table. If you need to rearrange something for a project, go ahead. However, if you are considering significant changes, please discuss it with one of the board members. Do not permanently mar/damage/attach things to the physical walls and space without first discussing it with the board members. That's not to stifle your creativity, we just need to make sure that everyone is on the same page.