Shops Log

Log of shop projects and general changes within the Wood and Metal shops.

Month

Power run for vanity lights and Mechanisms project board
Troubleshooting air leaks in Woodshop
- Swapping ceiling spool to a short air whip instead of 2 elbows
Sawstop brake tripped due to metal on a jig. Replacement blade/brake was installed

Dust collection additions
- Delta Jointer and Woodmaster Planer
- Sanding Bench
- Drum Sander
Rigid Table Saw power cord added
Air compressor
- Compressor plumbed in
- Soft line run to spool near SawStop
- Soft line run to wall near power panel
- Soft line run to Mechanisms' pit
Electrical run to Mechanisms' pit
Modified central worktable to store donated aluminum.

Additional lighting in wood shop
- 4x 4' LED fixtures over CNC/lathe area and Tool Island/sanders
- 4' LED fixture near back door
extension cord reel added to back of shop
Sawstop blade elevation gear replaced
Switch added for overhead 24" fan
Compressor wiring added in
- Partial air system in progress
Safety station upgraded to have PPE storage
Sandblaster assembled by Ryan C
CCTV Replacement finished
"Bret Bench" extended to wrap around towards the large toolbox
Peg board added above large toolbox
Grinder area cleaned out and reorganized
Central dust collection set back up*

Dust Collection Pipe run
- 6" Main trunk with 4" connections down to tools
3HP Dust Collector connected with temporary wiring
- Started reverse engineering control box

Consolidation panic
Tools shifted from Unit 2 over
New Metal shop electrical mostly stubbed out
- Subpanel split off for metal shop