FrankenBot 2.0

Back to list of Equipment

• Owner/Loaner: The Maker Station
• Serial Number: Serial Number: N/A
• Make/Model: FrankenBot
• Arrival Date: Nov 2016
• Usability: {{{usagerestrictions}}}
• Contact: info@themakerstation.com
• Where: 3D printer station

Info

The Frankenbot is a rebuilt/upgraded QUBD 2up Converted to 3up and then updgraded with 3d printed parts including http://www.thingiverse.com/thing:1247232 Thingiverse File]

FrankenBot: 2up:File:Example.jpg 3up:

General Specs

• Single print nozzle/Single color
• Material: Standard 1.75 PLA
• Build Dimensions: 170mm x 165m x 190mm
• Software: Repieter with Slic3r
• Operating Temperature Range
  • Maximum Tool Head Temperature: 265°C
  • Maximum Heated Bed Temperature: 100°C

Permissions

• For general use by members.
• Printing Policy
• Treat equipment as if it were your own and put away as or better than you found it.
• Printing costs are incurred on a per gram basis using the scale provided at the printing station. Reference the Maker Station's 3D Printing Policy for details.

Restrictions

Station Provided PLA ONLY Must have understanding of adjusting Z-layer

Advanced Operational Knowledge

There are some more advanced tasks that not everyone needs to know to print, but needs to know to troubleshoot:

• How to clear nozzle jams
• How to load/replace filament

Warnings

• Keep loose hair and sleeves away from all moving parts.
• Print nozzle/extruder operating temperature range is 180-300°C (356-572°F).300°C
• Some printed parts may present a CHOKING HAZARD or may be SHARP; not for children under 3 years old.
• Build plate is glass, take care not to scratch it

Safety

• Keep loose hair and sleeves away from all moving parts.
• Do not touch the printer nozzle/extruder while hot during print cycle.
• Material Safety Data Sheet:
• 3D Printer Policy, The Maker Station makerspace