FrankenBot 2.0

From The Maker Station Wiki!
Revision as of 08:18, 19 December 2016 by Bret (talk | contribs)
Jump to: navigation, search

Back to list of Equipment


  • Owner/Loaner: The Maker Station
  • Serial Number: Serial Number: N/A
  • Make/Model: FrankenBot
  • Arrival Date: Nov 2016
  • Usability: {{{usagerestrictions}}}
  • Contact: info@themakerstation.com
  • Where: 3D printer station


Info

The Frankenbot is a rebuilt/upgraded QUBD 2up Converted to 3up and then updgraded with 3d printed parts including http://www.thingiverse.com/thing:1247232 Thingiverse File]

{FrankenBot}
{Original 2up}
{3Up}

General Specs

  • Single print nozzle/Single color
  • Material: Standard 1.75 PLA
  • Build Dimensions: 170mm x 165m x 190mm
  • Software: Repieter with Slic3r
  • Operating Temperature Range
    • Maximum Tool Head Temperature: 265°C
    • Maximum Heated Bed Temperature: 100°C


Permissions

  • For general use by members.
  • Printing Policy
  • Treat equipment as if it were your own and put away as or better than you found it.
  • Printing costs are incurred on a per gram basis using the scale provided at the printing station. Reference the Maker Station's 3D Printing Policy for details.

Restrictions

Station Provided PLA ONLY Must have understanding of adjusting Z-layer

Frankenbot a.jpg

Basic Instructions

Advanced Operational Knowledge

There are some more advanced tasks that not everyone needs to know to print, but needs to know to troubleshoot:

  • How to clear nozzle jams
  • How to load/replace filament

Warnings

  • Keep loose hair and sleeves away from all moving parts.
  • Print nozzle/extruder operating temperature range is 180-300°C (356-572°F).300°C
  • Some printed parts may present a CHOKING HAZARD or may be SHARP; not for children under 3 years old.
  • Build plate is glass, take care not to scratch it


Safety

  • Keep loose hair and sleeves away from all moving parts.
  • Do not touch the printer nozzle/extruder while hot during print cycle.
  • Material Safety Data Sheet:
  • 3D Printer Policy, The Maker Station makerspace