https://wiki.themakerstation.com/api.php?action=feedcontributions&user=Yido&feedformat=atomThe Maker Station Wiki! - User contributions [en]2024-03-29T08:27:46ZUser contributionsMediaWiki 1.31.1https://wiki.themakerstation.com/index.php?title=Electronics_Room&diff=2570Electronics Room2022-08-19T01:37:01Z<p>Yido: /* When you're done */</p>
<hr />
<div>==The Electronics Room==<br />
The Electronics Room is the best place for working with electronics. <br />
<br />
===Equipment===<br />
* 3rd hand<br />
* Yihua combination soldering iron, hot air rework, and desoldering station<br />
* multimeters<br />
* Pliers<br />
* iFixit toolkit<br />
<br />
===Supplies===<br />
* Rubbing alcohol<br />
* Paper Towels<br />
* Miscellaneous wires<br />
* Fuses<br />
* LEDs<br />
* Solder<br />
* Flux<br />
<br />
===When you're done===<br />
Return all equipment to their original places. <br />
<br />
Turn off and unplug all equipment from the the power bar.<br />
<br />
Wipe all surfaces clean and brush any wires/solder/bits into the trash can<br />
<br />
Vacuum the floor clean of wires/solder/bits (Vacuum is in the server room by the computer/vending machines)<br />
<br />
Turn off the power bar and the lights</div>Yidohttps://wiki.themakerstation.com/index.php?title=Electronics_Room&diff=2569Electronics Room2022-08-17T03:14:07Z<p>Yido: /* Supplies */</p>
<hr />
<div>==The Electronics Room==<br />
The Electronics Room is the best place for working with electronics. <br />
<br />
===Equipment===<br />
* 3rd hand<br />
* Yihua combination soldering iron, hot air rework, and desoldering station<br />
* multimeters<br />
* Pliers<br />
* iFixit toolkit<br />
<br />
===Supplies===<br />
* Rubbing alcohol<br />
* Paper Towels<br />
* Miscellaneous wires<br />
* Fuses<br />
* LEDs<br />
* Solder<br />
* Flux<br />
<br />
===When you're done===<br />
Return all equipment to their original places. <br />
<br />
Turn off and unplug all equipment from the the power bar.<br />
<br />
Wipe all surfaces clean and brush any wires/solder/bits into the trash can<br />
<br />
Vacuum the floor clean of wires/solder/bits<br />
<br />
Turn off the power bar and the lights</div>Yidohttps://wiki.themakerstation.com/index.php?title=Electronics_Room&diff=2568Electronics Room2022-08-17T03:13:17Z<p>Yido: Created the Electronics Room page to organize equipment and supplies in this specific room</p>
<hr />
<div>==The Electronics Room==<br />
The Electronics Room is the best place for working with electronics. <br />
<br />
===Equipment===<br />
* 3rd hand<br />
* Yihua combination soldering iron, hot air rework, and desoldering station<br />
* multimeters<br />
* Pliers<br />
* iFixit toolkit<br />
<br />
===Supplies===<br />
* Rubbing alcohol<br />
* Paper Towels<br />
* Miscellaneous wires<br />
* Fuses<br />
* LEDs<br />
<br />
===When you're done===<br />
Return all equipment to their original places. <br />
<br />
Turn off and unplug all equipment from the the power bar.<br />
<br />
Wipe all surfaces clean and brush any wires/solder/bits into the trash can<br />
<br />
Vacuum the floor clean of wires/solder/bits<br />
<br />
Turn off the power bar and the lights</div>Yidohttps://wiki.themakerstation.com/index.php?title=Workspace&diff=2567Workspace2022-08-17T03:07:20Z<p>Yido: /* The Electronics Room */</p>
<hr />
<div>This is meant to be a collection of information about the features, operation, and maintenance of our workspace.<br />
<br />
== Location ==<br />
The Maker Station is located in the Pickens Industrial Business Park off of Allgood Road in Marietta, a few minutes away from the Allgood Rd and Cobb Pkwy intersection. <br />
<br/>'''Address:''' [https://goo.gl/maps/ViBqmqiuqnG2 869 Pickens Industrial Drive North East, Suite# 1, Marietta, GA]<br />
<br />
== Equipment ==<br />
Equipment at the space is constantly changing due to generous donations and the needs of the members. An attempt to catalog them can be found on t the [[Equipment]] page.<br />
<br />
== Access to the Space ==<br />
If you would like to visit the space, the best way is to attend an open house or other event as published on our [http://www.meetup.com/Cobb-County-Makers-Meetup/ Meetup page]. This is the best way to find which events are scheduled in the space. You may find members there at other hours, but since you never can tell, your best bet is to check the calendar. Once you join and become a member of the space, you will be given a lockbox code to allow you to access a key to the facility. You can use this to come and go as needed to work on your own projects and make use of the space. You will need to adhere to the guidelines around ingress/egress to ensure a safe and enjoyable working environment.<br />
<br />
== Entry/Exit ==<br />
During open house or scheduled events, guests can enter/exit as they wish. Members accessing the space at other times, should log your entry and exit time on the sign-in sheet. The sign-in sheet is on a clipboard hanging on the wall behind the main door from the street. Please make sure you sign in and out so we have a log of activity and traffic in the space. Future projects may augment/replace this procedure, but for now, this is how we will access the space.<br />
When leaving, if you are the last one out, make sure the lights are off, and that all doors are locked. <br />
<br />
== Rollup Door ==<br />
There is a rollup door in back to provide access for larger equipment and supplies. It can be accessed by driving around the building. Watch out for large trucks and loading dock traffic. Do not park/leave your vehicle unattended at the loading dock area. Make sure the rollup door is secured and the rear personnel door is locked when not in use.<br />
<br />
'''SAFETY WARNING DO NOT WORK DIRECTLY UNDERNEATH THE ROLL UP DOOR'''<br />
<br />
== Lights ==<br />
To conserve power usage for the space, please turn off unnecessary lights in the space. Please use lights as needed for safety and project work, but turn them off when finished. When leaving make sure all lights are out. <br />
<br />
== Bathroom ==<br />
Bathroom on the far right in the central back room. <br />
<br />
Please help take care of this facility and report any maintenance issues immediately. We are all responsible for keeping this area clean and sanitary. There is no cleaning service.<br />
<br />
== The Train ==<br />
*sigh* --- do you miss it already? Our original makerspace was located on 52 Powder Springs St in Marietta right next to the train tracks. Some of the older members may be nostalgic for the train.<br />
<br />
== The Plane==<br />
Our second makerspace was located on 1700 Cumberland Point Dr in Marietta across the street from Dobbins Air force base. When a large plane was landing, it always seemed like the wheels would touch our roof as it roared by!<br />
<br />
==The [[Electronics Room]]==<br />
The Electronics Room is between the Board Room and the Members' Storage Room. It contains lots of electronics tools and supplies, including soldering irons, solder, wires, multimeters, fuses, LEDs, and more. <br />
Check out a partial list of equipment here.<br />
<br />
== Usage and Maintenance ==<br />
We are all part of this community and as we use the space, things will get messy. Please take time to put your projects away as best you can and clean up any messes or safety hazards (even if they are not your own) so that we can keep this an enjoyable place for everyone. Members will have storage bins for their use. Guests should take any of their project materials with them when they leave. The space is there to be used by the members. We do not need committee to decide to move a table. If you need to rearrange something for a project, go ahead. However, if you are considering significant changes, please discuss it with one of the board members. Do not permanently mar/damage/attach things to the physical walls and space without first discussing it with the board members. That's not to stifle your creativity, we just need to make sure that everyone is on the same page.</div>Yidohttps://wiki.themakerstation.com/index.php?title=Workspace&diff=2566Workspace2022-08-17T03:07:02Z<p>Yido: /* The Electronics Room */</p>
<hr />
<div>This is meant to be a collection of information about the features, operation, and maintenance of our workspace.<br />
<br />
== Location ==<br />
The Maker Station is located in the Pickens Industrial Business Park off of Allgood Road in Marietta, a few minutes away from the Allgood Rd and Cobb Pkwy intersection. <br />
<br/>'''Address:''' [https://goo.gl/maps/ViBqmqiuqnG2 869 Pickens Industrial Drive North East, Suite# 1, Marietta, GA]<br />
<br />
== Equipment ==<br />
Equipment at the space is constantly changing due to generous donations and the needs of the members. An attempt to catalog them can be found on t the [[Equipment]] page.<br />
<br />
== Access to the Space ==<br />
If you would like to visit the space, the best way is to attend an open house or other event as published on our [http://www.meetup.com/Cobb-County-Makers-Meetup/ Meetup page]. This is the best way to find which events are scheduled in the space. You may find members there at other hours, but since you never can tell, your best bet is to check the calendar. Once you join and become a member of the space, you will be given a lockbox code to allow you to access a key to the facility. You can use this to come and go as needed to work on your own projects and make use of the space. You will need to adhere to the guidelines around ingress/egress to ensure a safe and enjoyable working environment.<br />
<br />
== Entry/Exit ==<br />
During open house or scheduled events, guests can enter/exit as they wish. Members accessing the space at other times, should log your entry and exit time on the sign-in sheet. The sign-in sheet is on a clipboard hanging on the wall behind the main door from the street. Please make sure you sign in and out so we have a log of activity and traffic in the space. Future projects may augment/replace this procedure, but for now, this is how we will access the space.<br />
When leaving, if you are the last one out, make sure the lights are off, and that all doors are locked. <br />
<br />
== Rollup Door ==<br />
There is a rollup door in back to provide access for larger equipment and supplies. It can be accessed by driving around the building. Watch out for large trucks and loading dock traffic. Do not park/leave your vehicle unattended at the loading dock area. Make sure the rollup door is secured and the rear personnel door is locked when not in use.<br />
<br />
'''SAFETY WARNING DO NOT WORK DIRECTLY UNDERNEATH THE ROLL UP DOOR'''<br />
<br />
== Lights ==<br />
To conserve power usage for the space, please turn off unnecessary lights in the space. Please use lights as needed for safety and project work, but turn them off when finished. When leaving make sure all lights are out. <br />
<br />
== Bathroom ==<br />
Bathroom on the far right in the central back room. <br />
<br />
Please help take care of this facility and report any maintenance issues immediately. We are all responsible for keeping this area clean and sanitary. There is no cleaning service.<br />
<br />
== The Train ==<br />
*sigh* --- do you miss it already? Our original makerspace was located on 52 Powder Springs St in Marietta right next to the train tracks. Some of the older members may be nostalgic for the train.<br />
<br />
== The Plane==<br />
Our second makerspace was located on 1700 Cumberland Point Dr in Marietta across the street from Dobbins Air force base. When a large plane was landing, it always seemed like the wheels would touch our roof as it roared by!<br />
<br />
==[[The Electronics Room]]==<br />
The Electronics Room is between the Board Room and the Members' Storage Room. It contains lots of electronics tools and supplies, including soldering irons, solder, wires, multimeters, fuses, LEDs, and more. <br />
Check out a partial list of equipment here.<br />
<br />
== Usage and Maintenance ==<br />
We are all part of this community and as we use the space, things will get messy. Please take time to put your projects away as best you can and clean up any messes or safety hazards (even if they are not your own) so that we can keep this an enjoyable place for everyone. Members will have storage bins for their use. Guests should take any of their project materials with them when they leave. The space is there to be used by the members. We do not need committee to decide to move a table. If you need to rearrange something for a project, go ahead. However, if you are considering significant changes, please discuss it with one of the board members. Do not permanently mar/damage/attach things to the physical walls and space without first discussing it with the board members. That's not to stifle your creativity, we just need to make sure that everyone is on the same page.</div>Yidohttps://wiki.themakerstation.com/index.php?title=Workspace&diff=2565Workspace2022-08-17T03:06:22Z<p>Yido: Added Electronics Room section</p>
<hr />
<div>This is meant to be a collection of information about the features, operation, and maintenance of our workspace.<br />
<br />
== Location ==<br />
The Maker Station is located in the Pickens Industrial Business Park off of Allgood Road in Marietta, a few minutes away from the Allgood Rd and Cobb Pkwy intersection. <br />
<br/>'''Address:''' [https://goo.gl/maps/ViBqmqiuqnG2 869 Pickens Industrial Drive North East, Suite# 1, Marietta, GA]<br />
<br />
== Equipment ==<br />
Equipment at the space is constantly changing due to generous donations and the needs of the members. An attempt to catalog them can be found on t the [[Equipment]] page.<br />
<br />
== Access to the Space ==<br />
If you would like to visit the space, the best way is to attend an open house or other event as published on our [http://www.meetup.com/Cobb-County-Makers-Meetup/ Meetup page]. This is the best way to find which events are scheduled in the space. You may find members there at other hours, but since you never can tell, your best bet is to check the calendar. Once you join and become a member of the space, you will be given a lockbox code to allow you to access a key to the facility. You can use this to come and go as needed to work on your own projects and make use of the space. You will need to adhere to the guidelines around ingress/egress to ensure a safe and enjoyable working environment.<br />
<br />
== Entry/Exit ==<br />
During open house or scheduled events, guests can enter/exit as they wish. Members accessing the space at other times, should log your entry and exit time on the sign-in sheet. The sign-in sheet is on a clipboard hanging on the wall behind the main door from the street. Please make sure you sign in and out so we have a log of activity and traffic in the space. Future projects may augment/replace this procedure, but for now, this is how we will access the space.<br />
When leaving, if you are the last one out, make sure the lights are off, and that all doors are locked. <br />
<br />
== Rollup Door ==<br />
There is a rollup door in back to provide access for larger equipment and supplies. It can be accessed by driving around the building. Watch out for large trucks and loading dock traffic. Do not park/leave your vehicle unattended at the loading dock area. Make sure the rollup door is secured and the rear personnel door is locked when not in use.<br />
<br />
'''SAFETY WARNING DO NOT WORK DIRECTLY UNDERNEATH THE ROLL UP DOOR'''<br />
<br />
== Lights ==<br />
To conserve power usage for the space, please turn off unnecessary lights in the space. Please use lights as needed for safety and project work, but turn them off when finished. When leaving make sure all lights are out. <br />
<br />
== Bathroom ==<br />
Bathroom on the far right in the central back room. <br />
<br />
Please help take care of this facility and report any maintenance issues immediately. We are all responsible for keeping this area clean and sanitary. There is no cleaning service.<br />
<br />
== The Train ==<br />
*sigh* --- do you miss it already? Our original makerspace was located on 52 Powder Springs St in Marietta right next to the train tracks. Some of the older members may be nostalgic for the train.<br />
<br />
== The Plane==<br />
Our second makerspace was located on 1700 Cumberland Point Dr in Marietta across the street from Dobbins Air force base. When a large plane was landing, it always seemed like the wheels would touch our roof as it roared by!<br />
<br />
==The Electronics Room==<br />
The Electronics Room is between the Board Room and the Members' Storage Room. It contains lots of electronics tools and supplies, including soldering irons, solder, wires, multimeters, fuses, LEDs, and more. <br />
Check out a partial list of equipment here.<br />
<br />
== Usage and Maintenance ==<br />
We are all part of this community and as we use the space, things will get messy. Please take time to put your projects away as best you can and clean up any messes or safety hazards (even if they are not your own) so that we can keep this an enjoyable place for everyone. Members will have storage bins for their use. Guests should take any of their project materials with them when they leave. The space is there to be used by the members. We do not need committee to decide to move a table. If you need to rearrange something for a project, go ahead. However, if you are considering significant changes, please discuss it with one of the board members. Do not permanently mar/damage/attach things to the physical walls and space without first discussing it with the board members. That's not to stifle your creativity, we just need to make sure that everyone is on the same page.</div>Yidohttps://wiki.themakerstation.com/index.php?title=File:Electronics_Soldering_Iron.jpg&diff=2564File:Electronics Soldering Iron.jpg2022-08-17T03:01:08Z<p>Yido: </p>
<hr />
<div></div>Yidohttps://wiki.themakerstation.com/index.php?title=Laser_Cutter&diff=2563Laser Cutter2022-08-12T20:46:39Z<p>Yido: Adjusted formatting, added recommended acrylic vendors</p>
<hr />
<div>== Info ==<br />
{{Template:Equipment<br />
|owner= The Maker Station <br />
|serial=<br />
|model=Orion 60 Watt<br />
|arrived=2020<br />
|usagerestrictions=[[File:Warning.png]]Restricted Usage/Training Required[[File:Warning.png]]<br />
|contact= #laser-cutter channel on Slack<br />
|where=Back shop unit 2 near the roll up door for now<br />
}}<br />
<br />
[[File:LaserCutter Safety.png|right|text-top|400px]] <br />
'''General Specs'''<br />
* It is a 60 watt laser<br />
* x approx 700 mm<br />
* y approx 500 mm<br />
* z<br />
<br />
== Permissions == <br />
* [[File:Warning.png]]Restricted Access [[File:Warning.png]] TRAINING REQUIRED [[File:Warning.png]]<br />
* Contact knowledgeable makerspace members using the #laser-cutter channel on Slack for training and access to the lasercutter<br />
* Treat equipment as if it were your own and put away as or better than you found it<br />
* Allow time for cleaning up after work is complete<br />
<br />
== Restrictions ==<br />
* DO NOT cut material containing chlorine atoms or molecules [[File:Skullcrossbones.png]][[File:Skullcrossbones.png]][[File:Skullcrossbones.png]]<br />
* How to test unknown plastics to see if they contain chlorine: https://vimeo.com/1615418<br />
<br />
===Places to purchase acrylic and laser cutting material===<br />
<br />
Piedmont Plastics - in Dacula<br />
Canal Plastics<br />
TAP Plastics <br />
McMaster-Carr - in Douglasville; you can pick up at the location by calling ahead<br />
<br />
Be prepared to soak cast acrylic in warm water to remove the protective paper.<br />
<br />
The extruded acrylic from big box stores, such as the Optix brand from Lowes, cuts very slowly and is prone to catching fire. The cast acrylic from the above industrial vendors are recommended.<br />
<br />
== Basic Instructions ==<br />
=== Use Lightburn to design and control the laser===<br />
<br />
https://lightburnsoftware.com/<br />
== Warnings ==<br />
<br />
* Keep loose hair and sleeves away from all moving parts.<br />
* Beware of hot parts.<br />
* Beware of dust, fumes, choking hazards.<br />
* Never leave machine unattended<br />
<br />
<br />
== Safety [[File:warning.png]] ==<br />
* Do not stare at the laser, it is very bright and can damage your vision<br />
* Do not operate the laser with the lid open<br />
* Do not look through any cutouts or openings at the firing laser. It can damage your vision.<br />
* Make sure the exhaust is vented as appropriate for the materials you are cutting.<br />
* If you are cutting plastics, make sure you understand what exhaust gases will be produced. [[File:Skullcrossbones.png]]'''Some are toxic!!'''[[File:Skullcrossbones.png]]<br />
* Never leave the laser cutter operating unattended for any reason! '''EVER!''' This poses a very real fire hazard and should be monitored at all times.<br />
<br />
[[File:WarningLaser.png]]<br />
<br />
== References ==<br />
* https://www.buildyourcnc.com/item/cnc-machine-blacktooth-laser-cutter-engraver-40w<br />
<br />
<youtube>UEvMpiRJKTI</youtube></div>Yidohttps://wiki.themakerstation.com/index.php?title=Laser_Cutter&diff=2562Laser Cutter2022-08-12T20:41:30Z<p>Yido: </p>
<hr />
<div>== Info ==<br />
<br />
{{Template:Equipment<br />
|owner= The Maker Station <br />
|serial=<br />
|model=Orion 60 Watt<br />
|arrived=2020<br />
|usagerestrictions=[[File:Warning.png]]Restricted Usage/Training Required[[File:Warning.png]]<br />
|contact= #laser-cutter channel on Slack<br />
|where=Back shop unit 2 near the roll up door for now<br />
}}<br />
<br />
<br />
[[File:LaserCutter Safety.png|right|text-top|400px]] <br />
'''General Specs'''<br />
* It is a 60 watt laser<br />
* x approx 700 mm<br />
* y approx 500 mm<br />
* z<br />
<br />
== Permissions == <br />
* [[File:Warning.png]]Restricted Access [[File:Warning.png]] TRAINING REQUIRED [[File:Warning.png]]<br />
* Contact knowledgeable makerspace members using the #laser-cutter channel on Slack for training and access to the lasercutter<br />
* Treat equipment as if it were your own and put away as or better than you found it<br />
* Allow time for cleaning up after work is complete<br />
<br />
== Restrictions ==<br />
* DO NOT cut material containing chlorine atoms or molecules [[File:Skullcrossbones.png]][[File:Skullcrossbones.png]][[File:Skullcrossbones.png]]<br />
* How to test unknown plastics to see if they contain chlorine: https://vimeo.com/1615418<br />
*<br />
<br />
== Basic Instructions ==<br />
=== Use Lightburn to desgin and control the laser<br />
<br />
https://lightburnsoftware.com/<br />
== Warnings ==<br />
<br />
* Keep loose hair and sleeves away from all moving parts.<br />
* Beware of hot parts.<br />
* Beware of dust, fumes, choking hazards.<br />
* Never leave machine unattended<br />
<br />
<br />
== Safety [[File:warning.png]] ==<br />
* Do not stare at the laser, it is very bright and can damage your vision<br />
* Do not operate the laser with the lid open<br />
* Do not look through any cutouts or openings at the firing laser. It can damage your vision.<br />
* Make sure the exhaust is vented as appropriate for the materials you are cutting.<br />
* If you are cutting plastics, make sure you understand what exhaust gases will be produced. [[File:Skullcrossbones.png]]'''Some are toxic!!'''[[File:Skullcrossbones.png]]<br />
* Never leave the laser cutter operating unattended for any reason! '''EVER!''' This poses a very real fire hazard and should be monitored at all times.<br />
<br />
[[File:WarningLaser.png]]<br />
<br />
== References ==<br />
* https://www.buildyourcnc.com/item/cnc-machine-blacktooth-laser-cutter-engraver-40w<br />
<br />
<youtube>UEvMpiRJKTI</youtube></div>Yidohttps://wiki.themakerstation.com/index.php?title=Main_Page&diff=2555Main Page2022-07-29T02:24:27Z<p>Yido: </p>
<hr />
<div><!--Amazon Smiles Banner Ad: File:AmazonSmileHolidays2017.jpg --> <br />
<br />
<br />
<br />
<h1>'''Welcome to The Maker Station!'''<br />
<br/><br />
<span style="font-size:smaller">-- Marietta's Makerspace --</span><br />
</h1><br />
The Maker Station Inc is home to a vibrant community of local makers in Cobb County and the greater Atlanta metro area. <br />
Here curious and like-minded folks come together to work on projects, discover new areas of interest, develop a new business idea, or simply grow their personal hobbies. The makerspace is a 100% volunteer driven 501c3 non-profit corporation. We are a valuable resource for Smyrna, Marietta, Kennesaw, Acworth, and surrounding metro areas. <br />
We started our journey in 2014 to build a makerspace close to home and welcome all interested community members to help grow and shape this makerspace / hackerspace into a thriving, collaborative environment.<br />
<br />
<br />
<br />
<youtube>rXSxgEtJKDs</youtube><br />
<br />
== How to Join ==<br />
Joining is easy! Just follow these steps and you will be on your way in no time.<br />
# Visit [[join|the join page]] to select the type of membership that applies to you<br />
# Click through and complete your transaction to set up recurring billing.<br />
# Join the [http://www.meetup.com/The-Maker-Station/ Meetup] group to keep track of our events<br />
# Join the [http://themakerstation.slack.com Slack messenger] group by sending an email to [mailto:info@themakerstation.com?SUBJECT=Connect+me+to+Slack info@themakerstation.com] and asking for Slack access.<br />
# Read through the information on our [[Policies and Procedures]] page<br />
# Go Make something!<br />
<br />
=== Membership Options ===<br />
<br />
{| style="height:100%; margin-left: 1px; margin-right: auto; "<br />
|- style="vertical-align: top; height:100%; "<br />
<br />
| style="height:100%; width: 33%; " | <br />
{| style="border: 1px solid #999999; height:100%; width:100%; "<br />
|- style="text-align:center; "<br />
| style="color: #eeeeff; background-color: #88aaff; font-size: 30px; padding: 10px; margin: 0px; " | [https://wiki.themakerstation.com/Join#Student_Level_.28.2430.2Fmo.29 STUDENT]<br />
|- style="text-align:center; font-size:200%; font-style: bold;"<br />
| $40<small style="font-size:50%">/MO*</small><br />
|- style="height:100%; "<br />
| style ="border: 1px solid #eeeeee; padding: 5px; height:100%; vertical-align:top; " | <br />
* up to 4 visits per month <br/> &nbsp;&nbsp;for one (1) member<br />
* *open to all, no student ID required<br />
* *save up to 10% with 12 mo option<br />
<br />
|}<br />
<br />
| style="height:100%; width: 33%; " | <br />
{| style="border: 1px solid #999999; height:100%; width:100%; "<br />
|- style="text-align:center; "<br />
| style="color: #eeffee; background-color: #99ee99; font-size: 30px; padding: 10px; margin: 0px; " | [https://wiki.themakerstation.com/Join#Maker_Level_.28.2460.2Fmo.29 MAKER]<br />
|- style="text-align:center; font-size:200%; font-style: bold;"<br />
| $72<small style="font-size:50%">/MO*</small><br />
|- style="height:100%; "<br />
| style ="border: 1px solid #eeeeee; padding: 5px; height:100%; vertical-align:top; " | <br />
* '''unlimited''' access per month <br/> &nbsp;&nbsp; for one (1) member<br />
* guest privileges<br />
* group discounts<br />
* on-site storage<br />
* voting rights<br />
* *save up to 10% with 12 mo option<br />
|}<br />
<br />
| style="height:100%; width: 33%; " | <br />
{| style="border: 1px solid #999999; height:100%; width:100%; "<br />
|- style="text-align:center; "<br />
| style="color: #ffeeee; background-color: #ffcc99; font-size: 30px; padding: 10px; margin: 0px; " | [https://wiki.themakerstation.com/Join#Makerspace_Friends_.28.2450.2Fmo.29 Reciprocal Friends]<br />
|- style="text-align:center; font-size:200%; font-style: bold;"<br />
| $60<small style="font-size:50%">/MO*</small><br />
|- style="height:100%; "<br />
| style ="border: 1px solid #eeeeee; padding: 5px; height:100%; vertical-align:top; " | <br />
* 15% Discount offered to members of other makerspaces in ATL<br />
* Must be a member of Freeside, Decatur Makers, Mass Collective, Counterpoint Hackerspace, etc<br />
* '''unlimited''' access per month <br/> &nbsp;&nbsp; for one (1) member<br />
* guest privileges<br />
* group discounts<br />
* on-site storage<br />
* voting rights<br />
|}<br />
<br />
| style="height:100%; width: 33%; " | <br />
{| style="border: 1px solid #999999; height:100%; width:100%; "<br />
|- style="text-align:center; "<br />
| style="color: #ffeeee; background-color: #ffaaaa; font-size: 30px; padding: 10px; margin: 0px; " | PREMIUM<br />
|- style="text-align:center; font-size:200%; font-style: bold;"<br />
| $400<small style="font-size:50%">/MO</small><br />
|- style="height:100%; "<br />
| style ="border: 1px solid #eeeeee; padding: 5px; height:100%; vertical-align:top; " | <br />
* '''unlimited''' access per month <br/> &nbsp;&nbsp;for '''''two (2)''''' members<br />
* limited quantity available<br />
* guest privileges<br />
* group discounts<br />
* on-site storage<br />
* voting rights<br />
* secured, dedicated <br/>&nbsp;&nbsp; 152 ft<sup>2</sup> office space perfect for co-working/remote office or large projects<br />
<!--SOLDOUT image commented out: [[File:Sold-out.png|200px|center]]--><br />
|}<br />
<br />
|- style="text-align: center; font-size:100%; "<br />
| colspan="3" | [[Join | '''CLICK HERE FOR MORE DETAILS AND TO JOIN!''']]<br />
|}<br />
<br />
=== GIFT Membership Options ===<br />
<br />
{| style="height:100%; margin-left: 1px; margin-right: auto; "<br />
|- style="vertical-align: top; height:100%; "<br />
<br />
| style="height:100%; width: 33%; " | <br />
{| style="border: 1px solid #999999; height:100%; width:100%; "<br />
|- style="text-align:center; "<br />
| style="color: #eeeeff; background-color: #88aaff; font-size: 30px; padding: 10px; margin: 0px; " | [https://wiki.themakerstation.com/Join#GIFT_Student_Memberships_starting_at_.2430.2Fmo GIFT: Student]<br />
|- style="text-align:center; font-size:200%; font-style: bold;"<br />
| $40<small style="font-size:50%">/MO*</small><br />
|- style="height:100%; "<br />
| style ="border: 1px solid #eeeeee; padding: 5px; height:100%; vertical-align:top; " | <br />
* up to 4 visits per month <br/> &nbsp;&nbsp;for one (1) member<br />
* *open to all, no student ID required<br />
* *save up to 10% with 12 mo option<br />
|}<br />
<br />
| style="height:100%; width: 33%; " | <br />
{| style="border: 1px solid #999999; height:100%; width:100%; "<br />
|- style="text-align:center; "<br />
| style="color: #eeffee; background-color: #99ee99; font-size: 30px; padding: 10px; margin: 0px; " | [https://wiki.themakerstation.com/Join#GIFT_Maker_Memberships_starting_at_.2460.2Fmo GIFT: Maker]<br />
|- style="text-align:center; font-size:200%; font-style: bold;"<br />
| $72<small style="font-size:50%">/MO*</small><br />
|- style="height:100%; "<br />
| style ="border: 1px solid #eeeeee; padding: 5px; height:100%; vertical-align:top; " | <br />
* '''unlimited''' access per month <br/> &nbsp;&nbsp; for one (1) member<br />
* guest privileges<br />
* group discounts<br />
* on-site storage<br />
* voting rights<br />
* *save up to 10% with 12 mo option<br />
|}<br />
<br />
| style="height:100%; width: 33%; " | <br />
{| style="border: 1px solid #999999; height:100%; width:100%; "<br />
|- style="text-align:center; "<br />
| style="color: #ffeeee; background-color: #ffcc99; font-size: 30px; padding: 10px; margin: 0px; " | [https://wiki.themakerstation.com/Join#US_Veterans.2C_Police.2C_Fire_Fighters.2C_Teachers.2C_and_Librarians_.28.2450.2Fmo.29 Vets & Public Service]<br />
|- style="text-align:center; font-size:200%; font-style: bold;"<br />
| $60<small style="font-size:50%">/MO*</small><br />
|- style="height:100%; "<br />
| style ="border: 1px solid #eeeeee; padding: 5px; height:100%; vertical-align:top; " | <br />
* 15% Discount offered to US Veterans and Police, Fire Fighters and Teachers in public service<br />
* Must be a US Veteran, Active Duty, or local Police, Fire Fighter, Teacher, or Librarian working for a public institution<br />
* '''unlimited''' access per month <br/> &nbsp;&nbsp; for one (1) member<br />
* guest privileges<br />
* group discounts<br />
* on-site storage<br />
* voting rights<br />
|}<br />
<br />
|- style="text-align: center; font-size:100%; "<br />
| colspan="3" | [[Join | '''CLICK HERE FOR MORE DETAILS AND TO JOIN!''']]<br />
|}<br />
<br />
[[File:banner7.jpg]]<br />
<br />
== Address / Location ==<br />
{| class="wikitable floatright"<br />
| {{#display_map:33.972346, -84.526986|width=300|height=300|zoom=13}}<br />
|}<br />
'''Address:''' [https://goo.gl/maps/ViBqmqiuqnG2 869 Pickens Industrial Drive North East, Suite# 1, Marietta, GA] <br><br />
We are located in the Pickens Industrial Business Park off of Allgood Road in Marietta, a few minutes away from the Allgood Rd and Cobb Pkwy intersection. <br/><br />
<br/><br />
'''Parking:''' Plenty of parking right out front!<br/><br />
Look for the Dalek on the window next to the door.<br/><br />
<br />
== Hours of Operation ==<br />
The Maker Station is not open to the public but we do host Public Events.<br> <br />
'''Open House events are once a month, but the day and time varies, please see our Meetup calendar.''' <br> <br />
<br />
<br /><br />
Other events are generally open to the public and guests at the discretion of the event organizer.<br> <br />
See the http://www.meetup.com/Cobb-County-Makers-Meetup/events/calendar for all event details.<br> <br />
<br /><br />
'''Member Hours:''' 8am to 10pm daily, limited to dues-paying members. <br>Extended hours are available upon consultation with the [mailto:info@themakerstation.com Board of Directors].<br />
<br />
==Events==<br />
Our official calendar of events is found on [http://www.meetup.com/Cobb-County-Makers-Meetup/events/ meetup.com]. Please check regularly for new events! <br />
<br />
Members may schedule events on a first-come, first-serve basis. To schedule an event, please contact the [mailto:info@themakerstation.com Board of Directors].<br />
<br />
== How to Contact Us ==<br />
<br />
* [mailto:info@themakerstation.com Email] : '''info@themakerstation.com'''<br />
* Like our [https://www.facebook.com/themakerstation/ '''Facebook Page''']<br />
* Join our conversation at [https://www.facebook.com/groups/CobbCountyMakers/ '''Facebook Group''']<br />
* See Our Events on [http://www.meetup.com/Cobb-County-Makers-Meetup/ '''Meetup.com''']<br />
* Check out our pics on [http://instagram.com/themakerstation '''Instagram''']<br />
<br />
<strike>Subscribe to our</strike> Help us make a podcast!<br />
* [https://itunes.apple.com/us/podcast/the-maker-station-podcast/id916073646?mt=2&uo=4 Click here for iTunes]<br />
* [http://themakerstation.libsyn.com/rss Use this RSS link for other podcast apps]<br />
<br />
= Donate to the Maker Station Inc =<br />
The Maker Station Inc is a registered 501(c)(3) non-profit corporation. Your donation helps us ''make'' a local makerspace here in Cobb County and cover operating expenses: rent, utilities, and upkeep.<br />
<br />
== Donation Money ==<br />
<br />
The Maker Station, Inc. is a registered 501(c)(3) non-profit organization. A letter will be provided indicating that no goods or services were exchanged for this donation and that your contribution is 100% tax deductible.<br />
<br />
'''One time financial donations''' can be made through our secure 3rd party payment processor, gumroad.com. <br />
* [https://gumroad.com/l/uuxba Single one-time monetary donation via gumroad.com]<br />
<br />
'''Recurring monthly financial donations''' can also be made through our secure 3rd party payment processor, gumroad.com. <br />
The input form shows a $20+ suggested value, but you are free to type in any amount of $5 or greater.<br />
<br />
* [https://gumroad.com/l/DQyXz Click Here to make automatic monthly recurring monetary donations]<br />
<br />
== Donate Materials & Supplies ==<br />
Due to limited space at the Maker Station, materials and equipment donations must be approved by the Board of Directors. We ask that only equipment in good working order be donated. We are not a repair shop nor a recycling facility, and generally unable to salvage material "just in case it may be useful", etc.<br />
<br />
Contact the board (info@themakerstation.com) if you would like to make donations.<br />
<br />
'''The following ARE NOT ACCEPTED at any time:'''<br />
* CRT Monitors and Televisions<br />
* Hazardous Material, paints, solvents, etc<br />
* Broken or discarded appliances and electronics<br />
* Basically anything that costs money to dispose of properly<br />
<br />
= Neighbors Food & Supplies =<br />
Below is a short list of the closest brick and mortar restaurants and stores<br />
<br />
<br />
=== Restaurants & Food ===<br />
* [[Tienda Conchita - Green Taco House]]<br />
* [[Food Basket Gas Station]]<br />
* El Nopal Restaurant<br />
* The Crooked Tree Restaurant<br />
* CVS Pharmacy<br />
* Quik Trip<br />
<br />
=== Materials & Supplies ===<br />
* Auto Parts Store<br />
* Home Depot<br />
* Rockler Woodworking<br />
* Lowes<br />
* Ace Hardware<br />
* Grainger Industrial Supply<br />
* McMaster Carr<br />
* Harbor Freight<br />
<br />
== Maker Friends & Makerspaces ==<br />
A non-exhaustive list of our local and regional maker friends and makerspaces<br />
<br />
'''Georgia'''<br />
* Freeside Atlanta [http://wiki.freesideatlanta.org wiki.freesideatlanta.org]<br />
* Roswell Firelabs [https://roswellfirelabs.org/ roswellfirelabs.org]<br />
* Geekspace Gwinnett - Lawerenceville [http://www.geekspacegwinnett.org www.geekspacegwinnett.org]<br />
* Decatur Makers - Decatur [http://decaturmakers.org decaturmakers.org]<br />
* Counterpoint Hackerspace - Roswell ''gone but not forgotten''<br />
* Berry College - Mt Berry [http://www.hackberrylab.com www.hackberrylab.com] <br />
* Hatch Athens - Athens [http://www.hatchathens.com www.hatchathens.com]<br />
* The Clubhouse - Augusta [http://theclubhou.se theclubhou.se]<br />
* Maven Makers - Savannah [http://www.mavenmakers.com www.mavenmakers.com]<br />
* The STEAM Generation [http://steamgeneration.org steamgeneration.org]<br />
* Southeast Makers Alliance - Atlanta [http://southeastmakersalliance.org southeastmakersalliance.org]<br />
* Mass Collective - Atlanta [http://masscollective.org/ masscollective.org]<br />
* Columbus Makes it - Columbus Ga - [http://www.columbusmakesit.com/ www.columbusmakesit.com]<br />
<br />
'''Alabama'''<br />
* Red Mountain Makers - Birmingham http://www.redmountainmakers.org<br />
* Mobile Makerspace - Mobile http://makerspacemobile.org<br />
* Makers Local 256 - Hunstville [https://256.makerslocal.org 256.makerslocal.org]<br />
<br />
'''Florida'''<br />
* MakerFX Makerspace - Orlando http://www.meetup.com/MakerFX<br />
* FamiLAB - Longwood http://familab.org<br />
<br />
'''Kentucky'''<br />
* LVL1 Hackerspace - Louisville http://www.lvl1.org<br />
<br />
'''North Carolina'''<br />
*<br />
<br />
'''South Carolina'''<br />
*<br />
<br />
'''Tennessee'''<br />
* Knox Makers - Knoxville http://knoxmakers.org<br />
* Make Nashville http://makenashville.org<br />
* Chatt*lab - Chattanooga http://www.chattlab.org<br />
<br />
<br />
<br />
<br />
----<br />
<!-- Amazon Smiles Banner Ad Below --><br />
<!--[[File:Amazonbannervalentines.png|700px|link=https://www.amazon.com/gp/r.html?C=2AU9G2CMQ9IQM&R=7J6EOVOG9PTO&T=C&U=http%3A%2F%2Fsmile.amazon.com%2Fch%2F47-3989486&A=SKNCBWCET7SDOZZPH5F3YAZNSBOA&H=4TL4WSJM2ZWJOE8AXE2IQ9IGGGIA]]--></div>Yidohttps://wiki.themakerstation.com/index.php?title=Elegoo_Mars_3&diff=2550Elegoo Mars 32022-07-26T00:54:13Z<p>Yido: Created page with "The SLA resin printer at the space is an Elegoo Mars 3 printer. [https://drive.google.com/file/d/19-icVP-ni26iF_6HdU-_wnFfKllQTwTo/view User Manual (PDF)]"</p>
<hr />
<div>The SLA resin printer at the space is an Elegoo Mars 3 printer. <br />
<br />
[https://drive.google.com/file/d/19-icVP-ni26iF_6HdU-_wnFfKllQTwTo/view User Manual (PDF)]</div>Yidohttps://wiki.themakerstation.com/index.php?title=Equipment&diff=2549Equipment2022-07-26T00:50:50Z<p>Yido: /* 3D Printers */</p>
<hr />
<div><br />
----<br />
This page is a catalog of the equipment available at The Maker Station. These pages provide information on equipment including status, operations, etc.<br/><br />
Please follow these instructions if you are --> '''[[adding new equipment]].'''<br />
<br />
== Electronics/Computers ==<br />
===3D Printers===<br />
* [https://drive.google.com/file/d/0B8b3ZIjicu09UDdHaVF4N1B5RXc/view?usp=sharing '''3D Printing Policy''']<br />
* [[LulzBot Mini 3D Printer]]<br />
* <strike>[[PrintrBot Simple Metal]] </strike><br />
* Lulzbot TAZ 6 3D Printer<br />
* [[D300VS Delta 3D Printer]]<br />
* Maker Select I3<br />
* [[Giant 3D Hang Printer]]<br />
* <strike> [[FrankenBot 2.0]]</strike><br />
* <strike>[[3D Printer - 3DS Cube no.1]]</strike><br />
* <strike>[[3D Printer - 3DS Cube no.2]]</strike><br />
* [[Elegoo Mars 3]]<br />
<br />
===Digital Fabrication===<br />
* [[CNC Router]]<br />
* [[Laser Cutter]]<br />
* <strike>CNC_-_Root2CNC</strike><br />
* [[Shapeoko 2 CNC]]<br />
* <strike>Maslow CNC</strike><br />
* [[Silhouette Portrait Paper/Vinyl Cutter]]<br />
* [[Equipment#3D_Printers|3D Printers]]<br />
<br />
===Computers & Other===<br />
* [[Laptop #1]]<br />
* Multiple DELL E6430 Laptops<br />
* [[Raspberry Pi]]<br />
* [[Weller Soldering Iron]]<br />
* [[Bench Power Supply]]<br />
* [[Handheld 2-meter Ham Radio]]<br />
* [[Ocilliscope]]<br />
** [[Rigol DS1054Z]]<br />
* [[Microscope]]<br />
<br />
== Power Tools ==<br />
* [[Air Compressor]]<br />
* [[Granite Top Tablesaw]]<br />
* [[SawStop Tablesaw]]<br />
* [[<s>Delta Tablesaw</s>/Not at station]]<br />
* [[Table Saw]] - Ryobi Portable<br />
* [[Rigid Planer]]<br />
* [[6" Jointer]]<br />
* [[Chop Saw]] /Miter Saw<br />
* [[Band Saw]]<br />
* [[Drill Press]]<br />
* [[Belt Sander Sanding Station]]<br />
* [[Router Table]]<br />
* [[Scroll Saw]]<br />
* WoodMaster Planer<br />
<br />
== Hot Work ==<br />
* Welding<br />
** Flux Welder<br />
** [[MillerMatic]] MIG<br />
* Min Metal Foundry - inspired by YouTuber King-of-Random<br />
* Anvil - Cast iron anvil, not suitable for forging<br />
* Rail Road Anvil - n loan from a member, please handle with care<br />
<br />
== Hand Tools ==<br />
* [[Dremel Micro 8050]]<br />
* Circular Saws<br />
* Jig Saws<br />
* Drills and Drill Bits<br />
* Levels<br />
<br />
== Crafting Tools ==<br />
* [[Singer Sewing Machine]]<br />
* [[Silhouette Portrait Paper/Vinyl Cutter]]<br />
* [[Heat Press]]<br />
<br />
== Audio/Video ==<br />
* [[MXL 990 Condenser Microphone]]<br />
* [[Edirol UA-1EX USB Audio Interface]]<br />
* [[Tapco Mix100 Compact Mixer]]<br />
<br />
== Miscellaneous ==<br />
* [[Key Lock Box]]<br />
* [[Flyers and Brochures]]<br />
* [[Logos, Graphics, & Stationary]]</div>Yido